Toshiba e-studio281c - Updating Scanner ROM

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
6 - 22
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct ( P. 6-3 " K-PWA-DLM-320").
(2) Shut down the equipment.
(3) Take off the right upper cover.
Fig. 6-21
(4) Remove the cover plate.
Fig. 6-22
Right upper cover
Cover plate