© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DATA CLONING with USB STORAGE DEVICE
9 - 7
9
<Setting Backup>
(12) Connect the USB storage device to the USB connector (host) on the SYS board.
(13) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig. 9-8
Notes:
• After the item is selected with the digital keys, displaying the next menu may take a long time.
• When “Disable” is set for the [Data Cloning Function] in TopAccess, the following screen is
displayed. Contact and ask the administrator to change the setting on TopAccess.
Fig. 9-9
07/11
To Next Page
Loading...
