e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DATA CLONING with USB STORAGE DEVICE
9 - 6
(The following screens are given as an example of when all items are backed up.)
(9) Press the [Start] button.
The backup starts and the backing up status is displayed on the LCD screen.
Fig. 9-6
(10) "Back Up Completed" is displayed on the LCD screen when the backup has been properly com-
pleted.
Fig. 9-7
(11) Turn the power OFF and remove the USB storage device.
05/11
To Next Page
Loading...
