Toshiba e-studio281c - 3.5.13 Beam level conversion setting; 3.5.14 Maximum toner density adjustment to paper type; 3.7.11 Reproduction ratio of primary scanning direction (black); 3.7.12 Reproduction ratio of primary scanning direction (color)

© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
ADJUSTMENT
3 - 47
3
3.7.11 Reproduction ratio of primary scanning direction (black)
The reproduction ratio of primary scanning direction with the resolution other than 600 dpi is adjusted in
Scanning Function for black image.
<Adjustment Mode (05)>
<Procedure>
Procedure is same as that of “3.7.2 Density adjustment”.
3.7.12 Reproduction ratio of primary scanning direction (color)
The reproduction ratio of primary scanning direction with the resolution other than 600 dpi is adjusted in
Scanning Function for color image.
<Adjustment Mode (05)>
<Procedure>
Procedure is same as that of “3.7.2 Density adjustment”.
Code Remarks
884 When the value increases, the image is zoomed in.
When the value decreases, the image is zoomed out.
Acceptable values: 0 to 255 (Default: 128)
* 0.1%/step
Code Remarks
1060 When the value increases, the image is zoomed in.
When the value decreases, the image is zoomed out.
Acceptable values: 0 to 255 (Default: 128)
* 0.1%/step