Toshiba e-studio281c - 3.10 Adjustment of the Paper Feeding System; 3.10.1 Sheet sideways deviation caused by paper feeding

© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
ADJUSTMENT
3 - 55
3
3.10 Adjustment of the Paper Feeding System
3.10.1 Sheet sideways deviation caused by paper feeding
<Procedure>
• The center of the printed image shifts to the front side. → Move the guide to the front side (Arrow (A)
direction in the lower figure).
Fig. 3-24
• The center of the printed image shifts to the rear side. → Move the guide to the rear side (Arrow (B)
direction in the lower figure).
Fig. 3-25
Feeding direction
Center
[
Rear
]
[
Front
]
Feeding direction
Center
[
Rear
]
[
Front
]