Toshiba e-studio281c - Page 322

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 56
• Bypass feeding
• Drawer feeding
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
Fig. 3-26
1) Loosen 2 screws.
2) Move the entire guide to the front or rear side.
3) Tighten the screws.
Fig. 3-27
(
A
)(
B
)
(
B
)
(
A
)