e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DATA CLONING with USB STORAGE DEVICE
9 - 14
<User Data Restore>
(3) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig. 9-19
Note: Note:
When “Disable” is set for the [Data Cloning Function] in TopAccess, the following screen is dis-
played. Contact and ask the administrator to change the setting on TopAccess.
Fig. 9-20
(4) Select the items to be performed with the digital keys.
• In case of restore, select the following items.
<Restoring User data>
Select "2: User Data Restore".
<Restoring Setting item>
Select "4: Setting Restore".
<Restoring SRAM data>
Select "6: SRAM Data Restore".
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
07/11