Toshiba e-studio281c - 3.11 Adjustment of the Developer Unit; 3.11.1 Doctor-to-sleeve gap (black developer unit)

To Next Page

To Previous Page

ADJUSTMENT

3 - 57

3.11 Adjustment of the Developer Unit

3.11.1 Doctor-to-sleeve gap (black developer unit)

Adjustment tool to use: Doctor-sleeve jig

Adjusting procedure:

(1) Take off the black developer unit from the equipment.

(2) Remove 2 screws and take off the developer

material cover. Then discharge the devel-

oper material.

Fig. 3-28

(3) Remove 2 screws, release the hook and take

off the doctor blade cover.

Fig. 3-29

Developer

material cover

Screw

Doctor blade

cover

Other manuals for Toshiba e-studio281c