Toshiba e-studio281c - Page 24

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 2
E110 Paper misfeeding ADU misfeeding (Paper not reaching the registra-
tion sensor): The paper which has passed through
ADU does not reach the registration sensor during
duplex printing.
P. 5 - 3
E120 Bypass misfeeding (Paper not reaching the regis-
tration sensor): The paper fed from the bypass tray
does not reach the registration sensor.
P. 5 - 4
E130 Upper drawer misfeeding (Paper not reaching the
upper drawer feed sensor): The paper fed from the
upper drawer does not reach the upper drawer feed
sensor.
P. 5 - 5
E140 Lower drawer misfeeding (Paper not reaching the
lower drawer feed sensor): The paper fed from the
lower drawer does not reach the lower drawer feed
sensor.
P. 5 - 6
E150 PFP upper drawer misfeeding (Paper not reaching
the PFP upper drawer feed sensor): The paper fed
from the PFP upper drawer does not reach the PFP
upper drawer feed sensor.
P. 5 - 7
E160 PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
P. 5 - 8
E190 LCF misfeeding (Paper not reaching the LCF feed
sensor): The paper fed from the LCF does not
reach the LCF feed sensor.
P. 5 - 9
E200 Paper transport jam Upper drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the upper
drawer feed sensor.
P. 5 - 1 0
Error code Classification Contents Troubleshooting