© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
ADJUSTMENT
3 - 23
3
Adjustment method 1
<Adjustment procedures (for A3/LD size paper)>
Test pattern (Ladder)
Fig. 3-12
This adjustment should be applied for each printout of the test pattern. (Skip this if the test pattern is
printed correctly.)
The order of the adjustment, test patterns and codes to be used are listed below.
Order Test pattern Code
1 1st page 417
2 2nd page 418
Use the image position of M as a
reference and align the image positions of
Y, C and K with this reference.
Feeding direction
A
B
[
Test pattern
]
Details of A
Details of B
[
Details of adjustment area
]
To Next Page
Loading...
