e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 14
F100 Other service call HDD format error: HDD cannot be initialized nor-
mally.
P. 5 - 9 8
F101 HDD unmounted: Connection of HDD cannot be
detected.
P. 5 - 9 8
F102 HDD start error: HDD cannot become ‘Ready’ state. P. 5-98
F103 HDD transfer time-out: Reading/writing cannot be
performed in the specified period of time.
P. 5 - 9 8
F104 HDD data error: Abnormality is detected in the data
of HDD.
P. 5 - 9 8
F105 HDD other error P. 5-98
F106 Point and Print partition damage P. 5-98
F107 /BOX partition damage P. 5-98
F108 /SHA partition damage P. 5-98
F110 Communication
related service call
Communication error between System-CPU and
Scanner-CPU
P. 5 - 6 3
F111 Scanner response abnormality P. 5-63
F120 Other service call Database abnormality: Database is not operating
normally.
P. 5 - 9 8
F130 Invalid MAC address P. 5-98
F200 Data overwrite kit (GP-1060) is taken off P. 5-99
F350 Circuit related service
call
SLG board abnormality P. 5-65
Error code Classification Contents Troubleshooting
To Next Page
Loading...
