© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
PREVENTIVE MAINTENANCE (PM)
4 - 7
4
Note: Note:
When the counter value of any of the pickup roller, feed roller and separation roller in each unit is
reset, the value of the feeding retry counter is also reset simultaneously. When the [RESET] but-
ton is pressed after selecting the feed unit in the Main Screen, the value of the feeding retry
counter is also reset simultaneously.
The feeding retry counter:
• Upper drawer Reset the feeding retry counter (08-1390)
• Lower drawer Reset the feeding retry counter (08-1391)
• PFP upper drawer Reset the feeding retry counter (08-1392)
• PFP lower drawer Reset the feeding retry counter (08-1393)
• Bypass unit Reset the feeding retry counter (08-1394)
• LCF Reset the feeding retry counter (08-1395)
To Next Page
Loading...
