© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
FIRMWARE UPDATING
6 - 7
6
When the FROM basic section software version to be updated is "V1.01 / 2.30" or later:
Fig. 6-8
(Updating all the items is taken as an example and explained in the following procedures.)
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version to be updated is "V1.00 / 8.22" or earlier:
Fig. 6-9
Status display during update Status display when update is completed
OS Update ....... OS Update ......................Completed
UI Data Update ....... UI Data Update ...............Completed
SysFirm Update ....... SysFirm Update ..............Completed
Engine MAIN Update ......Flash Update Engine MAIN Update ......Completed
Scanner Firm Update......Flash Update Scanner Firm Update......Completed
06/08
To Next Page
Loading...
