© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
FIRMWARE UPDATING
6 - 17
6
When the [Scanner ROM] has been updated,
“Scanner Firm Update..Flash Update” is
changed to “Scanner Firm Update..
Completed”.
When all data has been updated, “Update
Completed” is displayed.
* “Update Failed.” is displayed at the bottom of the LCD screen when the updating is not completed
properly. “Failed” appears next to the failed item on the status display.
Failed items Error message
06/08
To Next Page
Loading...
