Toshiba e-studio281c - Page 665

© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DATA CLONING with USB STORAGE DEVICE
9 - 19
9
(13) Press the [4] button.
The screen to select the setting restore item is displayed. In this screen, the items to be restored
are shown after the mark "*". (No items are selected in the screen by default.)
Fig. 9-27
(14) Select the items to be restored with the digital keys.
The mark "*" is shown on the selected item. The mark "*" can be deleted or added each time the
corresponding digital key is pressed.
• To restore the data individually, select the following items.
<Restoring TopAccess: Network/Print Service>
Select "1: Network/Print Service" only.
<Restoring TopAccess: SaveAsFile/Email/InternetFAX>
Select "2: SaveAsFile/Email/InternetFAX" only.
<Restoring TopAccess: Notification >
Select "3: Notification" only.
<Restoring TopAccess: Directory Service>
Select "4: Directory Service" only.
<Restoring Option: Fax setting>
Select "5: FAX Kit" only.
<Restoring Option: WirelessLAN/Bluetooth setting>
Select "6: WirelessLAN/Bluetooth Kit" only.
Note: Note:
Be sure to restore the same option items in the same condition as when the option items were
backed up.
05/11