OPERATOR’S MANUAL
series Robot Controller
Press [CUT] to cut the selected data at once. The display changes over as
shown below.
P O I N T X Y Z
↑
P O I N T 0 0 0 0 3 = 1 0 0 , 1 0 0 , 1 0 0 ,
P O I N T 0 0 0 0 6 = 400 , 400 , 4 00 ,
P O I N T 0 0 0 0 7 = 500 , 500 , 5 00 ,
P O I N T 0 0 0 0 8 = 0 , 0 , 0 ,
↓
P O I N T 0 0 0 0 9 = 0 , 0 , 0 ,
P O I N T 0 0 0 0 6 w / . w o r l d
< N O S A V F I N D T E A C H M - T O C U T >
(3) Caution
When this cut function is used, cut data can be saved in the cut buffer and
pasted at another position by means of the paste function stated in the next
paragraph.
STE 80720
– 5-33 –