4. Enter the prefix length of the IPv6 address in the Prefix Length field.
5. Click the Save button to save the settings.
Click the Delete Selected button to delete selected entries.
4.15.3 IPv6 WAN Host
Choose menu “IPv6 Firewall”
“IPv6 WAN Host”, and then you can view and set a Host list in
the screen as shown in Figure 4-103.
Figure 4-103
Description: Here displays the description about the WAN and this description is unique.
Details: The details can be IPv6 address, prefix length or port.
Edit: To modify an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button, and you will see the screen as shown in Figure 4-104.
Figure 4-104
2. Create a unique description for the host (e.g. Host_1) in the Description field.
3. Enter an IPv6 address in the IPv6 Address field.
4. Enter the prefix length of the IPv6 address in the Prefix Length field.
5. Click the Save button to save the settings.
Click the Delete Selected button to delete selected entries.
4.15.4 IPv6 Schedule
Choose menu “IPv6 Firewall”
“IPv6 Schedule”, and then you can view and set a Schedule list
in the next screen as shown in Figure 4-105.
94
To Next Page
Loading...
