4.8.9 USB Voice Mail
Choose “Voice”“USB Voice Mail“, you will see the screen as shown in Figure 4-65. USB Voice
mail is used to record voice messages when the call is not answered. To use this function, please
make sure an external USB hard drive/USB flash disk with configure files has been plugged into
the USB port on the GPON router.
Figure 4-65
Phone: Displays the phone that has voice message.
Source: Displays the source of the voice message, i.e. the remote caller account.
Dest: Displays the destination of the voice message, i.e. the local account.
Start Time: Displays when the voice message starts.
Length: Displays how long the voice message is.
Audition: Click Play to listen to the voice message.
Read Flag: Displays whether the voice message has been read or not.
Selected: Check the box to select the corresponding voice message.
To refresh the web page, click Refresh button.
To delete a voice message, check the Selected box and then click Remove button.
To configure the USB Voice Mail, click Config button to enter the web page as shown in Figure
4-66.
68
To Next Page
Loading...
