TP-Link TX-VG1530

TX-VG1530
N300 Wireless VoIP GPON Router User Guide
 Start Time, End Time: You can select all day-24 hours or you may enter the Start Time and
End Time in the corresponding field.
 Add: Click this button to add your selected time to the below table.
Click the Clear Schedule button to clear your settings in the table.
Click Save to complete the settings.
4.6.5 Wireless MAC Filtering
Choose menu “Wireless”  ”MAC Filtering”, you can control the wireless access by configuring
the Wireless MAC Filtering function, shown in Figure 4-40.
Figure 4-40
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Address: The wireless station's MAC address that you want to filter.
 Status: The status of this entry, either Enabled or Disabled.
 Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-41:
Figure 4-41
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example:
00:1D:0F:11:22:33.
50