Click the Enable/Disable Selected button to make selected entries enabled/disabled.
Click the Delete Selected button to selected entries.
4.6 Wireless
Choose “Wireless”, there are seven submenus to configure Wireless LAN settings. Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.
4.6.1 Basic Settings
Choose “Wireless””Basic Settings”, you will see the screen of Wireless--Basic settings
shown as below. The basic settings for wireless networking are set on this screen.
Figure 4-33
This page allows you to configure basic features of the wireless LAN interface. You can enable or
disable the wireless LAN interface, hide the network from active scans, set the wireless network
name (also known as SSID) and restrict the channel set based on Region requirements.
SSID (1-3): Up to four SSIDs for each BSS (Basic Service Set) can be entered in the filed
SSID1 ~ SSID3. The name can be up to 32 characters. The same name (SSID) must be
assigned to all wireless devices in your network. Check the Enable box to enable the desired
42
To Next Page
Loading...
