EasyManua.ls Logo

TP-Link TX-VG1530

TP-Link TX-VG1530
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX-VG1530
N300 Wireless VoIP GPON Router User Guide
Key Type: You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption.
"Disabled" means this WEP key entry is invalid.
64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
4.6.4 Wireless Schedule
Choose menu WirelessWireless Schedule, you can configure the Task Schedule as shown
below.
Figure 4-39
Note:
The time you set is the period you need the wireless off.
Before configure the wireless schedule, please set system time first which refer to
4.21.2 Time
Settings, then you can enable or disable Wireless Schedule.
Apply To: Select the day or days you need the wireless off.
49

Table of Contents

Other manuals for TP-Link TX-VG1530

Related product manuals