Figure 4-37
SSID: Select the SSID from the drop-down list.
Disable Wireless Security: If you do not want to use wireless security, check this radio
button. But it’s strongly recommended to choose one of the following modes to enable
security.
WPA/WPA2 – Personal (Recommended): It’s the WPA/WPA2 authentication type based on
pre-shared passphrase.
Figure 4-38
• Authentication Type - You can choose the version of the WPA-Personal security on the
drop-down list. The default setting is Automatic, which can select
WPA-Personal
(Pre-shared key of WPA) or WPA2-Personal (Pre-shared key of WPA) automatically based
on the wireless station's capability and request.
• Encryption - You can select either Auto, or TKIP or AES.
47
To Next Page
Loading...
