15-3* Alarm Log
Parameters in this group are array parameters, where up to 10 fault logs can be viewed. [0] is the most recent
logged data, and [9] the oldest. Error codes, values, and time stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Array [10]
Range: Function:
0 N/A* [0 - 255 N/A]
View the error code and look up its meaning in the
Troubleshooting
chap-
ter.
15-31 Alarm Log: Value
Array [10]
Range: Function:
0 N/A* [-32767 - 32767 N/A] View an extra description of the error. This parameter is mostly used in
combination with alarm 38 ‘internal fault’.
15-32 Alarm Log: Time
Array [10]
Range: Function:
0 s* [0 - 2147483647 s] View the time when the logged event occurred. Time is measured in
seconds from frequency converter start-up.
15-33 Alarm Log: Date and Time
Range: Function:
0 N/A* [0 - 0 N/A] Array parameter; Date & Time 0 - 9: This parameter shows at which time
the logged event occurred.
15-4* Drive Identification
Parameters containing read only information about the hardware and software configuration of the frequency
converter.
15-40 FC Type
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The read-out is identical to the frequency converter
series power field of the type code definition, characters 1-6.
15-41 Power Section
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The read-out is identical to the frequency converter
series power field of the type code definition, characters 7-10.
15-42 Voltage
Range: Function:
0 N/A* [0 - 0 N/A] View the FC type. The read-out is identical to the frequency converter
series power field of the type code definition, characters 11-12.
Parameter Description
166 TR200 Programming Guide
To Next Page
Loading...
