Trane TR200 Series - Page 269

Par. No.
#
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion in-
dex
Type
8-7* BACnet
8-70 BACnet Device Instance 1 N/A 1 set-up TRUE 0
Uint3
2
8-72 MS/TP Max Masters 127 N/A 1 set-up TRUE 0 Uint8
8-73 MS/TP Max Info Frames 1 N/A 1 set-up TRUE 0
Uint1
6
8-74 "I-Am" Service [0] Send at power-up 1 set-up TRUE - Uint8
8-75
Initialization Password ExpressionLimit 1 set-up TRUE 0
VisSt
r[20]
8-8* FC Port Diagnostics
8-80 Bus Message Count 0 N/A All set-ups TRUE 0
Uint3
2
8-81 Bus Error Count 0 N/A All set-ups TRUE 0
Uint3
2
8-82 Slave Messages Rcvd 0 N/A All set-ups TRUE 0
Uint3
2
8-83 Slave Error Count 0 N/A All set-ups TRUE 0
Uint3
2
8-84 Slave Messages Sent 0 N/A All set-ups TRUE 0
Uint3
2
8-85 Slave Timeout Errors 0 N/A All set-ups TRUE 0
Uint3
2
8-88 Reset FC port Diagnostics [0] Do not reset All set-ups TRUE - Uint8
8-89 Diagnostics Count 0 N/A 1 set-up TRUE 0 Int32
8-9* Bus Jog / Feedback
8-90 Bus Jog 1 Speed 100 RPM All set-ups TRUE 67
Uint1
6
8-91 Bus Jog 2 Speed 200 RPM All set-ups TRUE 67
Uint1
6
8-94 Bus Feedback 1 0 N/A 1 set-up TRUE 0 N2
8-95 Bus Feedback 2 0 N/A 1 set-up TRUE 0 N2
8-96 Bus Feedback 3 0 N/A 1 set-up TRUE 0 N2
Parameter Lists
268 TR200 Programming Guide