Example of using the Quick Setup option:
Assume you want to set the Ramp Down Time to 100 seconds!
1. Select [Quick Setup]. The first par.0-01
Language in Quick Setup appears
2.
Press [
▼
] repeatedly until par.3-42 Ramp 1 Ramp Down Time appears with the default setting of 20 seconds
3. Press [OK]
4.
Use the [
◀
] button to highlight the 3rd digit before the comma
5.
Change '0' to '1' by using the [
▲
] button
6.
Use the [
▶
] button to highlight the digit '2'
7.
Change '2' to '0' with the [
▼
] button
8. Press [OK]
The new ramp-down time is now set to 100 seconds.
It is recommended to do the set-up in the order listed.
NOTE: A complete description of the function is found in the parameter sections of this manual.
Illustration 3. 6: Quick Menu view.
The Quick Setup menu gives access to the 18 most important setup parameters of the frequency converter. After
programming the frequency converter will, in most cases, be ready for operation. The 18 Quick Setup parameters
are shown in the table below. A complete description of the function is given in the parameter description
sections of this manual.
How to Program
28 TR200 Programming Guide
To Next Page
Loading...
