Trane TR200 Series - Page 290

On Reference Bandwidth 20-84 196
On Time
23-00 221
Operating Hours
15-00 161
Operating Mode
40
Operating State At Power-up
0-04 40
Operation Mode
14-22 155
Option Ident.
167
Option In Slot A
15-70 168
Option In Slot B
15-72 168
Option In Slot C0
15-74 168
Option In Slot C1
15-76 168
Option Mounted
15-60 167
Option Ordering No
15-62 168
Option Serial No
15-63 168
Option Sw Version
15-61 168
Ordered Typecode String
15-44 167
Over Temp's
15-04 161
Over Volt's
15-05 161
Overmodulation
14-03 151
Over-voltage Control
2-17 72
P
Parameter Data 26
Parameter Info
169
Parameter Metadata
15-99 169
Parameter Selection
35
Parameter Set-up
26
Parity / Stop Bits
8-33 129
Period Start
23-51 229
Personal Menu Password
0-65 55
Pid Anti Windup
20-91 197
Pid Autotuning
193
Pid Autotuning
20-79 195
201
Pid Basic Settings
196
Pid Controller
197
Pid Diff. Gain Limit
20-96 198
Pid Differentiation Time
20-95 198
Pid Integral Time
20-94 197
Pid Normal/ Inverse Control
20-81 196
[Pid Output %]
16-58 174
Pid Output Change
20-72 195
200
Pid Performance
20-71 194
200
Pid Proportional Gain
20-93 197
[Pid Start Speed Hz]
20-83 196
[Pid Start Speed Rpm]
20-82 196
Power Card Ordering No
15-47 167
Power Card Serial Number
15-53 167
[Power Hp]
16-11 171
[Power Kw]
16-10 171
Power Reference Factor
23-80 235
Power Restore
3-92 81
Power Section
15-41 166
Power Up's
15-03 161
Preset Reference
3-10 73
Preset Reference Select
8-56 131
Preset Relative Reference
3-14 75
Production Settings
14-28 156
Programming Set-up
0-11 42
Protection Mode
19
Protocol
8-30 128
Pulse Filter Time Constant #29
5-54 109
Index
TR200 Programming Guide 289