Changing a Text Value
If the selected parameter is a text value, change the
text value by means of the [
▲
] [
▼
] navigation keys.
The up key increases the value, and the down key de-
creases the value. Place the cursor on the value you
want to save and press [OK].
130BP068.10
Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data
value, change the chosen data value by means of the
[
◀
] [
▶
] navigation keys as well as the [
▲
] [
▼
] naviga-
tion keys. Use the [
◀
] [
▶
] navigation keys to move the
cursor horizontally.
130BP069.10
Use the [
▲
] [
▼
] navigation keys to change the data
value. The up key enlarges the data value, and the
down key reduces the data value. Place the cursor on
the value you want to save and press [OK].
130BP070.10
Changing a Data Value, Step-by-Step
Certain parameters can be changed step by step or infinitely varying. This applies to par.1-20 Motor Power
[kW], par.1-22 Motor Voltage and par.1-23 Motor Frequency.
The parameters are changed both as a group of numeric data values and as numeric data values infinitely
varying.
How to Program
36 TR200 Programming Guide
To Next Page
Loading...
