Name: Trane TR200 Series
Brand: Trane
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3-45 Ramp 1 S-ramp Ratio at Accel. Start

Range: Function:

50 %* [1 - 99. %] Enter the proportion of the total ramp-up time (par.3-41

Ramp 1 Ramp

up Time) in which the acceleration torque increases. The larger the per-

centage value, the greater the jerk compensation achieved, and thus the

lower the torque jerks occurring in the application.

3-46 Ramp 1 S-ramp Ratio at Accel. End

Range: Function:

50 %* [1 - 99. %] Enter the proportion of the total ramp-up time (par.3-41

Ramp 1 Ramp

up Time) in which the acceleration torque decreases. The larger the per-

centage value, the greater the jerk compensation achieved, and thus the

lower the torque jerks in the application.

3-47 Ramp 1 S-ramp Ratio at Decel. Start

Range: Function:

50 %* [1 - 99. %] Enter the proportion of the total ramp-down time (par.3-42

Ramp 1 Ramp

Down Time) where the deceleration torque increases. The larger the per-

centage value, the greater the jerk compensation achieved, and thus the

lower the torque jerks in the application.

3-48 Ramp 1 S-ramp Ratio at Decel. End

Range: Function:

50 %* [1 - 99. %] Enter the proportion of the total ramp-down time (par.3-42

Ramp 1 Ramp

Down Time) where the deceleration torque decreases. The larger the

percentage value, the greater the jerk compensation achieved, and thus

the lower the torque jerks in the application.

Parameter Description

78 TR200 Programming Guide

Other manuals for Trane TR200 Series

Questions and Answers:

Need help?

Do you have a question about the Trane TR200 Series and is the answer not in the manual?

General