© Copyright 2018 TRENDnet. All Rights Reserved.
Status
Main
Status > Main
This section displays the status and other related information regarding the Access
Point.
1. Log into your management page (see “Access the management page” on page
8).
2. Click on Status, and click on Main.
3. Review the settings:
System Info: Following table displays information on the device.
o Device Name: Displays the name assigned to the device.
o Firmware Version: Displays the current firmware version installed
on this device.
o System Time: Displays the current time and date set on the
device.
o System Up Time: Displays the duration that this device has been
powered on.
Network: Following table displays the network information of this device.
o MAC Address: Displays this device’s LAN MAC address.
o IP Address: Displays the current IP address of this device.
o Subnet Mask: Displays the current subnet mask assigned to this
device.
o Default Gateway: Displays the current Gateway of this device.
o Primary Domain Name Server: Displays the current primary DNS
server of this device.
o Secondary Domain Name Server: Displays the current primary
DNS server of this device.
2.4GHz/5GHz1/5GHz2 Wireless: Following tables display each band’s
respective wireless information.
o Operation Mode: Displays the current operation mode set on the
specific wireless radio.
o Wireless Mode: Displays the 802.11a/b/g/n/ac mode of the
specific wireless radio.
o Channel Width: Displays the channel width of the specified
wireless radio. (MHz)
o Frequency (Channel): Displays the channel that the specific
wireless radio is broadcasting on.
o TX (Packets): Displays the amount of data that this wireless radio
has transmitted. (KB-Kilo Bytes; PKts.-Packets)
o RX (Packets): Displays the amount of data that this wireless radio
has transmitted. (KB-Kilo Bytes; PKts.-Packets)
o SSID List: Displays all configured wireless SSID’s for this wireless
radio and its MAC Address, Security Mode, and Status.
To Next Page
Loading...
Need help?
General
