TRENDnet TEW-826DAP - System; Wizard; Operation Mode

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-826DAP
14
System
Wizard
System > Wizard
You are able to set a new password using the password wizard.
If it is the first-time you are logging into the device, you will automatically be
prompted to run through the setup wizard.
1. Log into your management page (see “Access the management page” on page
8).
2. Click on System and Wizard.
3. Enter and re-enter your new login password and click OK.
4. Your new password settings will be applied and you will be redirected to the
login screen. You will need to use the new login password to proceed.
Operation Mode
System > Operation Mode
This section outlines the available operating modes available on the access point.
1. Log into your management page (see “Access the management page” on page
8).
2. Click on System and Operation Mode.
3. Select the operating mode to apply on each wireless band.