© Copyright 2018 TRENDnet. All Rights Reserved.
Diagnostics
Management > Diagnostics
Ping Test Parameter:
1. Log into your management page (see “Access the management page” on page
8).
2. Click on the Management tab and click Diagnostics.
IP: Enter the IP address you would like to conduct the ping test
Packet Length: Enter the packet size
Number of Pings: Enter the amount of pings to conduct.
Ping: Click to start ping test
Traceroute Parameter:
Management > Diagnostics
1. Log into your management page (see “Access the management page” on page
8).
2. Click on the Management tab and click Diagnostics.
Target: Enter the IP address to conduct traceroute test
Traceroute: Click to start traceroute test
Download Technical Support Data:
Management > Diagnostics
1. Log into your management page (see “Access the management page” on page
8).
2. Click on the Management tab and click Diagnostics.
3. Depending on your web browser settings, you may be prompted to save a file
(specify the location) or the file may be downloaded automatically to the web
browser settings default download folder. (Default Filename: TRENDnet
EAP_config.bin)
4. Save the configuration file to location on your computer.
**Technical Data may be requested from you by a technical support representative to
further assist you with support tickets**
To Next Page
Loading...
Need help?
General
