© Copyright 2018 TRENDnet. All Rights Reserved.
Management VLAN
Management > Management VLAN
1. Log into your management page (see “Access the management page” on page
8).
2. Click on the Management tab and click Management VLAN.
3. Review the settings for the 2.4G and both 5G profiles and click Save to save
settings.
Enable: Check box of the selected SSID to enable VLAN feature
VID: Enter the VID to assign on the selected wireless network
SSID: Displays the available SSID
WiFi Security: Displays the wireless security type of the wireless network
No VLAN Tag: Select this option to use no VLAN Tag
Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
To Next Page
Loading...
Need help?
General
