Trimble 5700 - Power output; Firmware

14 General Operation
142 5700/5800 GPS Receiver User Guide
5800 Operation
147.2 Power output
The 5800 receiver does not supply power from either of its 2 ports.
147.3 Firmware
A receiver’s firmware is the program inside the receiver that controls
receiver operations and hardware. You can upgrade the firmware for
the 5800 receiver using the WinFlash utility provided on the
Trimble R7, Trimble R8, 5700, and 5800 GPS Receivers CD.
For more information, see WinFlash Software, page 155.
C
Warning – Upgrading the firmware deletes all application files on the
5800 receiver.