Trimble 5700 User Manual

16 Software Utilities
152 5700/5800 GPS Receiver User Guide
5800 Operation
16.1 Configuration Toolbox Software
Configuration Toolbox is office software that helps you configure
selected Trimble GPS receivers.
Configuration Toolbox lets you:
• create and edit application files
• transfer application files to and from the receiver
• manage application files stored in the receiver
For more information, see Application Files, page 145.
161.1 Installing Configuration Toolbox
A copy of Configuration Toolbox is included on the Trimble R7,
Trimble R8, 5700, and 5800 GPS Receivers CD.
To install the software:
1. Insert the CD into the CD drive on your computer.
2. From the main menu select Install individual software
packages.
3. Select CToolBox vX.XX.
4. Follow the onscreen instructions.
160.1 Creating and editing application files
You can create an application file and transfer it to the receiver in
several different ways. The general workflow includes the following
steps:
1. Create and save the application file in Configuration Toolbox.
2. Connect the receiver to the computer and apply power.
3. Open the desired application file in Configuration Toolbox.
4. Transfer this application file to the receiver.

Trimble 5700 Specifications

General

Frequency	L1/L2
Power Consumption	6.0 W
Receiver Type	L1/L2 GPS receiver
Data Logging	Internal memory
Communication	Bluetooth
Operating Temperature	-40°C to +65°C
Power Supply	External
RTK Accuracy	10 mm + 1 ppm (horizontal), 15 mm + 1 ppm (vertical)