Trimble 5700 - Technical Specifications of the 5800

17 Specifications
164 5700/5800 GPS Receiver User Guide
5800 Operation
17.4 Technical Specifications
Table 17.3 lists technical specifications for the 5800 receiver.
Table 17.3 Technical specifications
Feature Specification
Tracking 24 channels L1 C/A code, L1/L2 full cycle carrier
Fully operational during P-code encryption
WAAS satellite tracking
Signal processing Maxwell architecture
Very low-noise C/A code processing
Multipath suppression
Start-up Cold start: < 60 seconds from power on
Warm start: < 30 seconds with recent ephemeris
Initialization Automatic while moving or static
Minimum
initialization time
10 sec + 0.5 × baseline length (km)
Communications Two RS-232 serial ports (Port 1, Port 2,)
Port 1: Baud Rates up to 115,200 bps
Port 2: Baud Rates up to 115,200 bps
RTS/CTS flow control negotiation supported on Port 2
only
Bluetooth communications with Trimble ACU or TSCe
with Bluecap module
Configuration Via user-definable application files or GPS
Configurator
Output formats NMEA-0183: AVR; GGA; GST; GSV; PTNL,GGK;
PTNL,GGK_SYNC; HDT; PTNL,PJK; PTNL,PJT; ROT;
PTNL,VGK; VHD; VTG; ZDA
GSOF (Trimble Binary Streamed Output)
RT17