Trimble 5700 - Introduction to Data Transfer

6 Transferring Data
70 5700/5800 GPS Receiver User Guide
5700 Operation
6.1 Introduction
The 5700 receiver keeps satellite measurements and other data in files
stored on a CompactFlash card. These files cannot be processed until
you transfer them to your office computer.
Note – The 5700 receiver supports a maximum of 512 files on the
CompactFlash cards.
On returning to the office after completing a survey, transfer the field
data to a computer that has the Trimble Geomatics Office™ software
installed. You can then process the survey data in Trimble Geomatics
Office to produce baselines and coordinates.