Trimble 5700 - Configuring the 5700 receiver

5700/5800 GPS Receiver User Guide 79
Software Utilities 7
5700 Operation
70.1 Configuring the 5700 receiver
To configure a 5700 receiver using GPS Configurator:
1. Connect Port 1, 2, or 3 on the receiver to a serial (COM) port on
the computer and apply power.
2. To start GPS Configurator, click , then select
Programs / Trimble / GPS Configurator / GPS Configurator.
The software automatically establishes a connection with the
5700 receiver.
3. Make appropriate selections for your required receiver settings.
For more information, refer to the GPS Configurator Help.
4. Click
Apply.
The settings in GPS Configurator are applied to the receiver.