Trimble GeoExplorer Series - Page 40

30 Using Bluetooth GeoExplorer Series Getting Started Guide
To set up a client serial port connection:
1. Make sure that the host
Bluetooth device is Discoverable.
2. Make the handheld Discoverable
(see page 27), and tap the
Serial
Ports
tab.
3. Add a new client serial port, or
change the settings for an
existing one.
• To change the settings for an
existing client serial port, tap
and hold the name of the
serial port in the
Client Serial
Ports
list.
• To add a new client serial
port, tap
New in the Client
Serial Ports
list. The list
immediately shows any
bonded devices that have a
serial port profile exposed.
The Searching icon appears,
and the handheld scans for
any other Bluetooth devices
that are within range and that
expose the serial port profile.
Tap the name of the serial
port you want to set up, and
tap Next.