121
Maintenance and Adjustment
ABS fuse box
To allow access to the ABS fuse box the
rider’s seat must be removed.
Main fuse
The 40 Amp main fuse is located beneath
the rider's seat and behind the left hand main
fuse box.
To allow access to the main fuse the rider’s
seat must be removed.
1. M a i n f u s e
Headlights
Headlights
Circuit Protected Position Rating
(Amps)
ABS 1 20
ABS 2 20
1
chgx_1
Adjust road speed to suit the visibility and
weather conditions in which the motorcycle
is being operated.
Ensure that the beams are adjusted to
illuminate the road surface sufficiently far
ahead without blinding oncoming traffic.
An incorrectly adjusted headlight may
impair visibility causing an accident.
Never attempt to adjust a headlight beam
when the motorcycle is in motion.
Any attempt to adjust a headlight beam
when the motorcycle is in motion may
result in loss of control and an accident.
If the motorcycle is to be used under
closed-course conditions, you may be
asked to tape the visible outer surface of
the headlight.
When taped, the headlight will overheat
and distort the outer surface. Therefore, to
avoid headlight distortion, always
disconnect the headlights when they are
taped for use under closed-course
conditions.
To Next Page
Loading...
