Triumph Tiger Explorer - Ignition Key

44
General Information
Ignition Key
1. Key number tag
In addition to operating the steering lock/
ignition switch, the ignition key is required to
operate the seat lock and fuel tank cap.
When the motorcycle is delivered from the
factory, two keys are supplied together with a
small tag bearing the key number. Make a
note of the key number and store the spare
key and key number tag in a safe place away
from the motorcycle.
A transponder is fitted within the key to turn
off the engine immobilizer. To ensure the
immobilizer functions correctly, always have
only one of the ignition keys near the ignition
switch. Having two ignition keys near the
switch may interrupt the signal between the
transponder and the engine immobilizer. In
this situation the engine immobilizer will
remain active until one of the ignition keys is
removed.
Always get replacement keys from your
authorized Triumph dealer. Replacement keys
must be 'paired' with the motorcycle’s
immobilizer by your authorized Triumph
dealer.
ceom
1
Caution
Do not store the spare key with the
motorcycle as this will reduce all aspects of
security.