Triumph Tiger Explorer - Set up Menu; Service; Auto - Self Cancelling Turn Signals

29
General Information
Set Up Menu
To access the set up menu; with the
motorcycle stationary and in neutral, press
and release the set button on the left hand
switch cube until 'SEtUP' is visible in the
display screen.
Press and release scroll button until the
desired display is visible. The display will scroll
through in the following order when pressing
up on the scroll button (it will scroll through
in the reverse order if down on the button is
pressed):
•Service;
• Auto - self cancelling turn signals;
• Units - change units (Imperial, US or
Metric;
• t-set - clock adjustment;
• ttc - Triumph traction control (if
equipped);
•ABS.
Each display provides the following
information:
Service
Shows the total distance that the motorcycle
has remaining before a service is required
(see page 35).
Auto - Self Cancelling Turn Signals
This Triumph model has a self cancelling turn
signal function that can be disabled or
enabled.
To disable or enable the self cancelling turn
signals; with the motorcycle stationary and in
neutral, press and release the set button on
the left hand switch cube until 'SEtUP' is
visible in the display screen.
Press and release the scroll button until 'Auto'
or 'MAnUAL' is visible in the display screen.
Press and release the set button and Auto or
MAnUAL will flash on and off.
Press and release the scroll button to select
Auto or MAnUAL then press the set button.
• Auto - Turn signal self cancelling is
on (see page 49).
• MAnUAL - auto self cancelling is off.
The turn signals will need to be
manually turned off (see page 49).
1. A u t o s e l e c t e d
To exit the auto menu, press and release the
home button and the odometer in the trip 1
menu will be visible in the display screen.
cgjp_6_2
1