125
Maintenance and Adjustment
6. Installation is the reverse of the removal
process.
Brake/Tail Light/License
Plate Light
Brake/Tail Light/License Plate Light
Replacement
The brake/tail light unit is a sealed,
maintenance free LED unit. The license plate
light is integral to the brake/tail light unit.
Turn Signals Lights
Bulb Replacement
1. Turn Signal lens
2. Securing screw
The lens on each turn signal light is held in
place by a securing screw located in the lens
of the light.
Release the screw and remove the lens to
gain access to the bulb for replacement.
Use a genuine Triumph supplied bulb as
specified in the Triumph Parts Catalog.
Always have replacement bulbs installed
by an authorized Triumph dealer.
To Next Page
Loading...
