128
Maintenance and Adjustment
Unpainted Aluminum Items
Items such as brake and clutch levers, wheels,
engine covers, top and bottom yokes on
some models must be correctly cleaned to
preserve their appearance. Please contact
your dealer if you are unsure which
components on your motorcycle are
unpainted aluminum parts.
Use a proprietary brand of aluminum cleaner.
Clean aluminum items regularly, in particular
after use in inclement weather, where the
components must be hand washed and dried
each time the machine is used.
Warranty claims due to inadequate
maintenance will not be allowed.
Windshield Cleaning
Clean the windshield with a solution of mild
soap or detergent and lukewarm water. After
cleaning, rinse well and then dry with a soft,
lint free cloth.
If the transparency of the windshield is
reduced by scratches or oxidation which
cannot be removed, the windshield must be
replaced.
Products such as window cleaning fluids,
insect remover, rain repellent, scouring
compounds, gasoline or strong solvents
such as alcohol, acetone, carbon
tetrachloride, etc. will damage the
windshield. Never allow these products to
contact the screen.
Never attempt to clean the windshield
while the motorcycle is in motion as
releasing the handlebars may cause loss of
vehicle control and an accident.
Operation of the motorcycle with a
damaged or scratched windshield will
reduce the rider's forward vision. Any such
reduction in forward vision is dangerous
and may lead to an accident causing injury
or death.
To Next Page
Loading...
