The operator can access any gauge function from the Ready screen.
The Ready screen displays the measurement mode on the first line.
The second line shows the source rod depth and date. The third line
shows the count time and time of day. The last line shows the
current project (if any).
NOTE
If the gauge display is difficult to read in bright light,
adjust the contrast as described in the Display Contrast
section on page C–27.
To conserve power, the Model 3450 gauge provides a sleep mode
(see page 3–17).
In sleep mode, the display and most of the
electronics are turned off. If the gauge is not in use for a period of
time, it will enter sleep mode. All data and settings are protected. To
turn the display on when in sleep mode, press any key (other than
the
〈ON〉 or 〈OFF〉 keys).
Before taking measurements, read this manual carefully. If you do
not completely understand the sections that cover radiation safety,
contact your company radiation safety officer (RSO) or the nearest
Troxler representative.
To Next Page
Loading...
