Troxler RoadReader Plus 3450 - Time;Date (Special Key)

Model 3450
3–11
TIME/DATE (SPECIAL KEY)
The Time/Date setup option allows the operator to change the time,
date, and time/date display format. To access the feature, press
〈1〉
Set Time/Date at the Gauge Setup menu (see previous page).
This option requires an access code. At the gauge prompt, use the
number keys to enter the access code (see page xi).
The gauge displays the Time/Date menu:
From this screen, the operator may change the time, date, or
time/date display format. To select a menu option, use the number
keys. To return to the Gauge Setup menu, press the
〈ENTER〉 key.
Time
To change the time, press 〈1〉 at the Time/Date menu. If displaying
the time in the AM/PM format, the display is:
With either display format option, the control unit requests the
current time. Press the
〈1〉 key for a.m. or 〈2〉 for p.m. Use the
number keys to enter the correct hour and minutes, then press the
〈ENTER〉 key.
The gauge updates the time and returns to the Time/Date screen. To
return to the Gauge Setup menu, press the
〈ENTER〉 key. To return
to the Ready screen, press the
〈ESC〉 key.
1- Change Time
2- Change Date
3- Change Format
ENTER for Setup
Current Time:
08:00 am
1- a.m. 2- p.m.
3. GETTING STARTED