HANDLING PROJECT DATA
The Model 3450 can store up to 1000 readings. The gauge stores the
readings under project names, with up to 620 readings per project.
Storing additional project data such as notes will reduce the
maximum number of stored readings.
The Project and Store functions allow handling of project data. The
keys for these two functions are located conveniently next to each
other on the keypad. Measurement results are stored in files (gauge
memory locations) called projects (named by the operator). The
Project function allows the operator to create a new project, view
project data, select a project (make an existing project active so that
additional data may be added to it), print the data stored in the
project, or erase projects. The Store function allows the operator to
store measurement results and other test-identifying information in a
selected project.
To access the Project function, press the 〈PROJECT〉 key. The
gauge displays the Project menu with the current project on the first
line.
The following text provides details on the Project function.
SELECT A PROJECT
The gauge displays the current project on the first line of the Project
menu. Use the arrow keys to scroll through the project names. When
the gauge displays the desired project, press
〈1〉.
The gauge enables the selected project name and returns to the
Ready screen.
1-
Select Project
2-
New
4- Print
3-
View 5- Erase
To Next Page
Loading...
