ERASE PROJECTS
At the Project menu shown on page 5–5,
press 〈5〉. The gauge
displays the Erase Project menu:
From this menu, the operator can erase either a single project or all
projects.
To erase a single project, use the arrow keys to scroll through the
project names displayed on the first line. When the gauge displays
the desired project, press
〈1〉. At the Are You Sure . . . display,
press the
〈YES〉 key. The gauge erases the project and returns to the
Erase Project menu. Return to the Ready screen by pressing the
〈ESC〉 key.
To erase all projects, press 〈2〉 at the Erase Project menu. At the
Are You Sure . . . display, press the
〈YES〉 key. The gauge erases
all the projects and returns to the Ready screen.
RECOVER ERASE
If project data is erased accidentally, the Recover Erase function
may be able to recover the lost information. There is no guarantee
that Recover Erase will successfully recover lost data. If any data
has been stored after the accidental erasure, then a successful
recovery is impossible.
To attempt to recover erased project data, press the 〈SPECIAL〉
key. At the Special functions menu, press
〈3〉 to access the Memory
Function menu. At the Memory Function menu, press
〈2〉.
If the gauge can recover the erased project data, it will display the
recovery and return to the Ready screen.
1-
Erase This Project
2-
Erase All Projects
To Next Page
Loading...
