Troxler RoadReader Plus 3450 - Page 50

Model 3450
3–25
Set Up QA Sample Locations
To set up the QA sampling mode, press 〈1〉 Set-Up Locations at the
QA Sampling menu.
Enter the average sample separation, up to 1000 (QA test strip
length divided by the number of samples to be taken). Then press
the
〈ENTER〉 key.
Enter the total number of samples, up to 100, using the number
keys. Then press the
〈ENTER〉 key.
The gauge stores the setup and returns to the QA Sampling menu.
Return to the Ready screen by pressing the
〈ESC〉 key.
View QA Sample Locations
To view the current QA sample positions, press 〈2〉 View at the QA
Sampling menu.
To scroll through the current QA sample positions, use the arrow
keys. To return to the Ready screen, press the
〈ESC〉 key.
QA Sampling
Enter Average Sample
Separation: xxxx
Press ENTER
QA Sampling
Enter Total Number
of Samples: xxx
Press ENTER
xxxx
xxxx
Position
Sample#
#1
#2
QA Sampling
3. GETTING STARTED