TSI Instruments Certifier Plus - Standard Components

1-2 
L i s t o f S t a n d a r d C o m p on e n t s
Carefully unpack the test system components from the shipping container. Check the individual parts
against the packing list and notify TSI
®
immediately if any parts are missing or damaged.
Certifier Plus High Flow Test System, Standard Kit (Model 4080-S)
Item
Number
Description
Replacement
Part Number
Qty.
1
Interface Module
a
4089
1
2
High Flow Module
b
4081
1
3
Inlet Filter, HEPA, 22 mm x 22 mm M/F (for use with 4081
High Flow Module)
1602341
1
4
Adapter, high pressure port
1611221
1
5
Adapter, 22 mm x 6 mm (to connect 4081 to Low Flow Filter)
1102091
2
6
Adapter, 15 mm ID x 22 mm OD
1102093
1
7
Airway pressure fitting with screen
1611330
1
8
Pressure tubing, silicone, 1/8-inch ID x 1/4-inch OD x 48 in.
3002053
1
9
Velcro
®
strap for use on High Flow Module
2913110
1
10
Flow module cable, REDEL
®
straight plug to 4-pin mini-DIN
130384
1
11
Hybrid carrying case (13.8 x 9.5 x 8.1 inch, 35 x 24 x 20.5 cm)
130389
1
12
Power supply 100/240 VAC to +12 VDC 2.1 mm plug, includes
plug set with NA, UK, EU, CN, SAA connectors
130400
1
13
Battery, 4 cell Lithium-Ion 7.2 V 6.4 AHr (pre-installed)
130385
1
14
Protective cover,  Plus Interface Module
130392
1
a
If ordering a 4089 Interface Module Kit for replacement, items 10 through 14 are included.
b
If ordering a 4081 High Flow Module Kit for replacement, items 3 through 9 are included.