4-14
Importing Configurations
The Plus Flow Analyzer can import configurations from a USB flash drive inserted into either
of the two USB-A ports located on the top side of the 4089 Interface Module. The Flow
Analyzer will recognize any configuration files and display them in the External Configurations tab.
To import a single configuration, either click on the 3-dot menu of that particular configuration file
and select the Import menu option, or check the corresponding box and press the export icon
(down arrow).
To import more than one configuration, press the check box for each configuration file or press the
checkbox in the Name column heading to select all configuration files.
Configuration files can be exported and imported between model 4089 Certifier Plus and
model 4090 Certifier Pro instruments.
interface module are not compatible with the Certifier Plus and Certifier Pro instruments. Users would
need to perform a one-time replication of the settings on a Certifier Plus or Certifier Pro Flow Analyzer
and save the new configuration.
E d i t i n g t h e Gr a p h S c r e e n
From the Graph screen, press on the pencil icon or on any displayed measurement symbols,
readings, or units to access the edit graph screen.
To Next Page
Loading...
